Latest Boating Forum Topics:

  • Can Anyone take a Boat out to Sea? (9 posts)
  • boat moter not spitting water??? (4 posts)
  • Where to buy sail boats in vancouver? (2 posts)
  • How do I contact the marina vhf marine radio? (8 posts)
  • arkansas boating exam help? (3 posts)
  • Can my passengers drink on my boat in MI? (4 posts)
  • What waste tankers do southern water use? (3 posts)
  • 3 hp gamefisher outboard stops running after 1 or 2 minutes? (3 posts)
  • where do you find navigation charts for the columbia river? (4 posts)
  • Pirate dialogue. What sorts of insults might old fashioned pirates shout at each other while swashbuckling? (6 posts)
  • How do ships float? (10 posts)
  • Why wont my 90 hp outboard motor lower into the water, it is stuck in the up posion. The seliniod clicks.? (4 posts)
  • When did sailing start in the world and by who? (4 posts)
  • What has the "Queen of the Netherlands" (the ship) got to do with the Port Phillip Bay "Pilots"? (2 posts)
  • I am interested in purchasing a boat for around ,000 and I found one. BUT...? (3 posts)
  •  
    Author Message

    Minnie

    Members


    Online status

    36 posts

    Location: Japan
    Occupation: Warder
    Age:

    #5710   2007-08-14 21:03 GMT      
    I recently purchased my first boat, a 1989 Reinell 179k. It is an I/O with a Ford 302V8. The boat appeared to be in excellent shape with 400 hours on it and I am the 3rd owner. Everything was fne on the first outing and every outing since (I have had it out 4 times) the boat occasionally lifts up high and to the right, causing a scare for all aboard. This has not happened under hard acceleration and appears to have nothing to do with the water conditions. When this happens I let completely off of the throttle and let the boat settle back down into the water. When I let off the throttle I do not hear the hull slapping the water, if that makes sense. The boat did not hit anything on the first outing and the previous owner claimed this never happened to him. The steering is normal, not tight, all fluids are topped of in good condition, the prop does not appear bent, the drive unit appears tight, fixed trim tabs in the factory position. What am I missing?

    Thanks-

    Minnie

    Members


    Online status

    36 posts

    Location: Japan
    Occupation: Warder
    Age:

    #5711   2007-08-14 21:12 GMT      
    Could be air in the hydraulic system that controls your trim of your I/O. That would explain the sudden rise of the bow. As for off to the right, check the fin located above the prop and it's alignment to center. That could alter your trajectory.

    Puppie

    Members


    Online status

    49 posts

    Location: Poland
    Occupation: Animal trainer
    Age:

    #5712   2007-08-14 21:13 GMT      
    There are many websites which help to find all about boats and it's accessories. You can search online to find them .
    You can also try some other resources.
    To know more you can visit
    http://www.myownboat.blogspot.com

    Lucky

    Members


    Online status

    37 posts

    Location: Belgium
    Occupation: Landscaper
    Age:

    #5713   2007-08-14 21:55 GMT      
    That's the torque of the Engine that might need to be corrected by the trim rudder on the lower unit. There a bolt on top of the out drive looking down turn the tab clock wise 1/4 " then try running keep adj until it put pressure on the boat to keep it from turning to starboard.Also is the outdrive loose as you can turn it from side to side with out the steering moving???Is this a bow rider an you might have to put the people on the port side an not on the bow??There a narrow boat an balance is critical.

    Piramidy

    Members


    Online status

    45 posts

    Location: Pakistan
    Occupation: Dentist
    Age:

    #5714   2007-08-15 01:00 GMT      
    The trim tab on the outdrive should not be causing this. If it was the trim tab it would affect the steering every time you throttle up.

    My guess would be un even load in the boat. Coolers, bait wells, cargo, etc on the starboard side and then a passenger of say 150 - 200 or more pounds moving to the starboard side on aft deck, while under way would cause exactly what you are describing

    Jules

    Members


    Online status

    51 posts

    Location: Northern Mariana Islands
    Occupation: Newscaster
    Age:

    #5715   2007-08-15 06:47 GMT      
    When ever you start out your trim should be fully down. If you go out and run the boat and fully trim if you stop for any reason you have to run drive down and trim up all over again.
    While running if the boat starts bouncing up and down that is what they call porpoising you are too trimmed out .Try running the trim down slightly till the porpoising stops
    > 1 <